Издательство СО РАН

Издательство СО РАН

Адрес Издательства СО РАН: Россия, 630090, а/я 187
Новосибирск, Морской пр., 2

soran2.gif

Baner_Nauka_Sibiri.jpg


Яндекс.Метрика

Array
(
    [SESS_AUTH] => Array
        (
            [POLICY] => Array
                (
                    [SESSION_TIMEOUT] => 24
                    [SESSION_IP_MASK] => 0.0.0.0
                    [MAX_STORE_NUM] => 10
                    [STORE_IP_MASK] => 0.0.0.0
                    [STORE_TIMEOUT] => 525600
                    [CHECKWORD_TIMEOUT] => 525600
                    [PASSWORD_LENGTH] => 6
                    [PASSWORD_UPPERCASE] => N
                    [PASSWORD_LOWERCASE] => N
                    [PASSWORD_DIGITS] => N
                    [PASSWORD_PUNCTUATION] => N
                    [LOGIN_ATTEMPTS] => 0
                    [PASSWORD_REQUIREMENTS] => Пароль должен быть не менее 6 символов длиной.
                )

        )

    [SESS_IP] => 34.239.185.22
    [SESS_TIME] => 1711692893
    [BX_SESSION_SIGN] => 9b3eeb12a31176bf2731c6c072271eb6
    [fixed_session_id] => 8b91509f53fb3b20d0556a24d9ce3cea
    [UNIQUE_KEY] => 3d25ed85010e0c1ad2063abb1d6c2203
    [BX_LOGIN_NEED_CAPTCHA_LOGIN] => Array
        (
            [LOGIN] => 
            [POLICY_ATTEMPTS] => 0
        )

)

Поиск по журналу

Химия в интересах устойчивого развития

2006 год, номер 6

DeNOx Cu/Carbon Xerogels

A. Cabiac1, N. Job2, J.-P. Pirard2 and G. Delahay1
1Laboratoire de Matériaux Catalytiques et Catalyse en Chimie Organique, UMR 5618-CNRS-ENSCM, Institut Charles Gerhardt FR 1878, 8, rue de l'Ecole Normale, Montpellier CEDEX 5 (France)
E-mail: gerard.delahay@enscm.fr
2Laboratoire de Génie Chimique, Institut de Chimie, Université de Liège (Bât B6a), B-4000 Liège (Belgium)

Аннотация

Carbon materials with different pore texture have been prepared by evaporative drying and pyrolysis of resorcinol-formaldehyde aqueous gels. These carbon xerogels have been characterised and used as copper catalyst supports in the Selective Catalytic Reduction of NO by NH3 at low temperature. Without metal, some activity is observed due to reaction between NO and NH3, but the NO conversion is strongly enhanced after copper introduction. High DeNOx efficiency was obtained on these Cu/carbon xerogels at very low temperature and some pore texture effect was observed. However, special cares have to be taken to avoid carbon consumption and preserve its surface by keeping reaction temperature below 215oC.