Издательство СО РАН

Издательство СО РАН

Адрес Издательства СО РАН: Россия, 630090, а/я 187
Новосибирск, Морской пр., 2

soran2.gif

Baner_Nauka_Sibiri.jpg


Яндекс.Метрика

Array
(
    [SESS_AUTH] => Array
        (
            [POLICY] => Array
                (
                    [SESSION_TIMEOUT] => 24
                    [SESSION_IP_MASK] => 0.0.0.0
                    [MAX_STORE_NUM] => 10
                    [STORE_IP_MASK] => 0.0.0.0
                    [STORE_TIMEOUT] => 525600
                    [CHECKWORD_TIMEOUT] => 525600
                    [PASSWORD_LENGTH] => 6
                    [PASSWORD_UPPERCASE] => N
                    [PASSWORD_LOWERCASE] => N
                    [PASSWORD_DIGITS] => N
                    [PASSWORD_PUNCTUATION] => N
                    [LOGIN_ATTEMPTS] => 0
                    [PASSWORD_REQUIREMENTS] => Пароль должен быть не менее 6 символов длиной.
                )

        )

    [SESS_IP] => 44.201.64.238
    [SESS_TIME] => 1711652053
    [BX_SESSION_SIGN] => 9b3eeb12a31176bf2731c6c072271eb6
    [fixed_session_id] => e0a7763b291d9cb4a43d1f74339455b4
    [UNIQUE_KEY] => e929f7d98fa17f4851c48d29c36e2653
    [BX_LOGIN_NEED_CAPTCHA_LOGIN] => Array
        (
            [LOGIN] => 
            [POLICY_ATTEMPTS] => 0
        )

)

Поиск по журналу

Химия в интересах устойчивого развития

2013 год, номер 6

Geopolymers based on mechanically activated Non-Ferrous Slags

A. M. KALINKIN1, T. C. ALEX2, S. K. NATH2, B. I. GUREVICH1, E. V. KALINKINA1, V. V. TYUKAVKINA1, S. KUMAR2
1Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Science Centre of the Russian Academy of Sciences, Ul. Fersmana 26A, Murmansk Region, Apatity 184209 (Russia)
kalinkin@chemy.kolasc.net.ru
2CSIR-National Metallurgical Laboratory, Jamshedpur 831007 (India)
alex@nmlindia.org
Ключевые слова: Zn slag, Cu–Ni slag, geopolymerisation, mechanical activation, carbon dioxide, reactivity, compressive strength
Страницы: 647-655

Аннотация

Geopolymerisation behaviour of Imperial Smelting Furnace (ISF) Zn slag and granulated Cu–Ni slag, mechanically activated in air and in CO2 atmosphere (P = 10 5 Pa), has been studied by XRD, SEM, FTIR, and isothermal conduction calorimetry. Mechanical activation of the slags has been carried out in a centrifugal-planetary mill AGO-2. Geopolymer samples have been prepared by mixing of the mechanically activated slag powders with NaOH solution or liquid glass and curing at (20±2) oC for up to 180 days. It has been observed that the ISF Zn slag and the granulated Cu–Ni slag are suitable for the synthesis of building materials through geopolymerisation. The effect of milling atmosphere on properties of geopolymers is found to be alkaline reagent specific. A suitable combination of the milling atmosphere and alkaline reagent is required to realize the beneficial effect on mechanical properties of the geopolymer.